Product category
TH type round link chain bucket elevator
TH series bucket elevator is the upgrading production of the HL series bucket elevator, compared with HL bucket elevator, it has large capacity, high elevating height and stable operation. Its main performance measures is up to the specification of JB3926-89(verticalbucket elevator).
TH series bucket elevator has Zh (with middle deep bucket),suitable for lifting materials in wet, sticky and difficult to throw, such as wet sand, sand, fertilizer, alkali powder and clay, etc.. Sh(with deep bucket) is suitable for conveying dry, loose, easily throw materials, such as gravel, coal, cement raw meal, slag and cement, etc.. TH series bucket elevator adopt mixed or gravity discharge, add materials by digging, run in the temperature between + 40 ℃ to -10 ℃. The available loose density of material is not more than 1.5t/m³£the temperature is below 250℃. TH series bucket elevator's main technical parameters are shown in table.
●Technical parameters sheet of TH type round link chain bucket elevator
Machine size |
TH315 |
TH400 |
TH500 |
TH630 |
TH800 |
TH1000 |
||||||
Bucket type |
Zh |
Sh |
Zh |
Sh |
Zh |
Sh |
Zh |
Sh |
Zh |
Sh |
Zh |
Sh |
Bucket capacity(l) |
3.75 |
6 |
5.9 |
9.5 |
9.3 |
15 |
14.6 |
23.6 |
23.3 |
37.5 |
37.6 |
58 |
Bucket spacing(mm) |
512 |
688 |
920 |
|||||||||
Capacity of the elevator(m3/h) |
35 |
60 |
60 |
94 |
75 |
118 |
114 |
185 |
146 |
235 |
235 |
365 |
Speed of the bucket(m/s) |
1.4 |
1.5 |
1.6 |
|||||||||
Diameter of pitch circle(mm) |
630 |
710 |
800 |
900 |
1000 |
1250 |
||||||
Chain(diameter*pitch)(mm) |
18×64 |
22×86 |
26×92 |
|||||||||
The load of the single chain(kN) |
≥320 |
≥480 |
≥570 |
|||||||||
Ring number for chain |
7 |
9 |
||||||||||
Number of branches for chain |
2 |
|||||||||||
Rotating speed of the shaft (rpm) |
42.5 |
37.6 |
35.8 |
31.8 |
30.5 |
24.4 |
Notice: the throughput in the table without considering the filling coefficient of bits, please according to the model selection of the selected table 11 bits of filling coefficient to modify throughput.
●Material properties and the corresponding filling coefficient table
Material properties |
filling coefficient ψ |
powder materials |
0.95 |
20 mm below the granular materials |
0.9 |
20 to 50 mm small block material |
0.8-0.9 |
More than 50 mm in a piece of material |
0.7-0.85 |
General damp slightly sticky powder materials |
0.6-0.7 |
●TH-type bucket elevator outline and installation dimension chart
Related Products
Online message
Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd
Add:Yidu City,Hubei Province,Lucheng Street Changjiang Road East No.8
Tel:+86-717-4904858 / 4820569
Mr. Zhou:+86-15871569828
Mr. Gong:+86-13508601368
Ms. Zou:+86-13872614986
©2021 Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd SEO tags Power by 300.cn