En Masse Conveyor
Chain Bucket Conveyor
GY Type Rotary Feeder
Gate & Valve
En Masse Conveyor
MS serial general en masse conveyor
Special high-temperature en masse conveyor for waste heat boiler
The special high-temperature en masse conveyor for waste heat boiler is specific to the waste heat boiler of metallurgy, building materials, chemical industry, etc. it is our own research and development of conveyor.
SMS serial en masse conveyor for bulk grain
SMS serial horizontal en masse conveyor for bulk grain is eight size, the maximum width is up to 1000mm; the maximum capacity is 1250t/h；the maximum conveying distance is 100m; the speed of chain scraper is up to 1.1m/s；The conveyor can be arranged to feed or discharge at one or more openings.
MSR type high temperature material en masse conveyor
MSR series thermal material conveyor is dedicated horizontal en masse conveyor specially designed for conveying high temperature materials. It stands in the international level, adopt hot strong steel to make main components and water cooling system, it can convey materials temperature up to 650℃,the droop head or limit weight tension tail will be adopt to compensate the thermal elongation of scraper chain. It can be widely used to convey sulfur slag, lead and zinc dust, soot, copper smelting smoke and other high temperature and high mill cut materials in metallurgy, building materials and chemical industries. it have 8 machine sizes, the machine width is up to 800mm; the maximum capacity is up to 60 m³/h; the maximum conveying distance is 80 meters; the maximum inclination angle is up to 10°. It can feed and discharge at more points. The main technical parameters are shown in the table below.
Super-wide special scraper conveyor for electrostatic precipitator
Super-wide scraper conveyor for electrostatic precipitator is used to handle the ash in the electrostatic precipitators, it consist of the drive arrangement, head assembly, scraper chain, steady flow device, tail assembly and so on. The conveyor use plate sleeve roller chain to be traction member, the scraper is fixed to the sleeve roller chain plate,the power input to the head device by the open chain, the head wheel is driven by the head shaft then drive the scraper chain to convey materials. The conveyor has scraper chain tension and onti-meandening device,main electrical protective device. The conveyor has wind steady flow device on the top of conveyor in side of electrostatic precipitator which can stabilize the airflow .after ash falling down by gravity,it will be get together by the scraper then conveyed to next process by conveyor, so that can improve the collection efficiency and economic benefits, reduce environmental pollution. The conveyor is especially suitable for electrostatic precipitators change to be flat from cone warehouse, moisture caking dust conveying which easy to absorb, for example it can be used to ash collecting an conveying in light paper industry electrostatic precipitator
FU type chain conveyor
FU type chain scraper conveyor is a special form of en masse conveyor, applicable to convey flowing power, smallblock material on horizontal or micro inclined(α≤10°）,can be widely used in cement, grain, coal, metallurgy, chemical industry, etc. This machine has compact structure, good sealing, and flexible process arrangement, can feed and discharge at multi-points. It adopt plate roller chain as traction components, as rolling friction exist between traction chain and guide friction, that can reduce running resistance of scraper chain, low consumption, scraper has long life and can realize long-distance conveying (Lmax = 100 m) and large capacity (Qmax = 700 m³/ h).
MC serial general enmasse conveyor
Note: 1.All of the chain scraper adopt outgoing arrangement ,the chain scraper are not shown in the drawing.2.The driving end ,vertical casing. bend casing and inlet section are A and B type.. when the B type driving end is selected, it must match the A type vertical casing and bend casing; when the A type driving end is selected, it must match the B type vertical casing and bend casing; the inlet section will be arbitrary selection. The type of selection as shown in the above drawing. 3.When the B type driving end is selected, the DO and GO type chain scraper can't be used.
SMC serial en masse conveyor for bulk grain
SMC series vertical en masse conveyor is designed specially for conveying bulk grain in the food industry.The maximum angle is up to 90° when it is inclined or vertical installation. There are six size, the maximum capacity of the conveyor is 350t/h，the maximum lifting height of the conveyor is 30m. The main technical parameters is as follows.
Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd
Add：Yidu City,Hubei Province,Lucheng Street Changjiang Road East No.8
Tel：+86-717-4904858 / 4820569