华友天宇科技(武汉)股份有限公司

1
2
4
2
6
Location:
Homepage
/
/
/
Flake Feeder

Product category

Number of views:
1000

Flake Feeder

The main products are buried scraper (general type, metallurgy special type, power plant special type, bulk grain special type, building material special type, wear-resistant, high-temperature and corrosion-resistant special type, large inclination type, etc.) conveyor, bucket elevator (TD , GTD, TB, GTB, NE, NBS, TH, GTH, etc.), belt (TD75, DTⅡ, DTⅡA, DJ, etc.) conveyors, screw (GX, LS, GLS, LSS, etc.) conveyors, chain buckets (DS , SDB, SDBF, etc.) conveyors, apron feeders, gate valves, etc. and their spare parts.
Category >
Slate Conveyor
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Product description
Parameters

    The phosphorus plate feeder drives the chain to run by driving, and drags the chain plate to make continuous linear motion to complete the purpose of conveying materials. Phosphorus plate feeders are widely used in mining, metallurgy, building materials and coal industries. This machine is mainly used under the silo and hopper with a certain silo pressure to transport all kinds of large bulk density materials evenly and continuously in a short distance to the secondary crushing, screening and transportation equipment, especially it is more suitable for use below the primary crushing. It is not only suitable for handling coarse-grained materials, but also for fine-grained materials. It can complete heavy work in harsh environments, and has great adaptability to changes in particle size and composition of materials, temperature, viscosity, frost, rain and snow or frozen materials. The feeding amount is even and accurate, but reliable. The machine can be installed horizontally or obliquely. The maximum inclination angle for upward transportation is 23º. It is widely used in non-ferrous, mining, cement, fertilizer, chemical, metallurgy, papermaking and other industries in the process of mining, light transportation, batching, etc. Evenly distribute bulk materials with a capacity of not more than 1.2t/m3, a block weight of more than 140kg, and a temperature of not higher than 350 degrees Celsius.

    Phosphorus plate feeders can be divided into light, medium and heavy phosphorus plate feeders due to the difference between phosphorus plates and chains; among them, the heavy plate feeder meshes with the chain pin through the sprocket teeth, and drags the chain plate for continuous operation. Linear motion. The chain plate is supported by the rollers and supporting rollers installed on the frame, and the chain and the sprocket are properly meshed by adjusting the tensioning device to complete the purpose of conveying materials.

    The heavy-duty plate feeder can transport materials with larger granularity, the material width is generally not greater than 60% of the plate width, and the conveying plate width is generally 1250mm-3150mm; the light and medium plate feeders convey the material block weight of no more than 140kg, and the accumulation per cubic meter The density is not more than 1200kg, and the width of the conveying plate is generally 500mm-1250mm.

 

●Layout of heavy-duty scale conveyor:

Lightweight Flake Feeder

Flat chain conveyor layout:

Lightweight Flake Feeder
  
   The following table lists five types of light series feeders, the maximum feeding volume can reach 845m3/h, and the main technical parameters are:
  

●Technical parameters sheet of QBG type Light-duty slat feeder

Machine size

Casing width
(mm)

Head to tail wheel center distance(mm)

Speed of feeder
(m/s)

Rated capacity (m3/h)

The largest feed particle size(mm)

QBG500-2

500

2000

0.05-0.4

7-88

180

QBG500-3

3000

QBG500-4.5

4500

QBG500-6

6000

QBG500-9

9000

QBG500-12

12000

QBG500-15

15000

QBG630-3

30

3000

0.04-0.4

11-175

200

QBG630-4.5

4500

QBG630-6

6000

QBG630-9

9000

QBG630-12

12000

QBG630-15

15000

QBG800-3

800

3000

0.04-0.4

19-308

350

QBG800-4.5

4500

QBG800-6

6000

QBG800-9

9000

QBG800-12

12000

QBG800-15

15000

QBG800-18

18000

QBG1000-3

1000

3000

0.03-0.4

25-507

460

QBG1000-4.5

4500

QBG1000-6

6000

QBG1000-9

9000

QBG1000-12

12000

QBG1000-15

15000

QBG1000-18

18000

QBG1250-3

1250

3000

0.03-0.4

40-845

600

QBG1250-4.5

4500

QBG1250-6

6000

QBG1250-9

9000

QBG1250-12

12000

QBG1250-15

15000

QBG1250-18

18000


  
●Dimensions of QBG type Light-duty slat feeder

 

Lightweight Flake Feeder

We could not find any corresponding parameters, please add them to the properties table
Next

Related Products

Online message

Username used for comment:
客户留言
Description:
验证码

Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd

Add:Yidu City,Hubei Province,Lucheng Street Changjiang Road East No.8

Tel:+86-717-4904858 / 4820569
Mr. Zhou:+86-15871569828
Mr. Gong:+86-13508601368
Ms. Zou:+86-13872614986

©2021 Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd        SEO tags    Power by 300.cn

 鄂ICP备19015303号-2

鄂公网安备 42058102000167号