Product category
Product category
Number of views:
1000
TD75 type fixed belt conveyor
Category >
Belt Conveyors
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Product description
Parameters
TD75 type general fixed belt conveyor (hereinafter referred as TD75) is widely used for conveying bulk materials or items in metallurgy, coal, transportation, textile, hydropower and other departments for its large capacity, simple structure, convenient maintenance, low cost, strong commonality .According to the requirement of the conveying process, it can be simple conveying, can also combine with other conveyor to form horizontal or inclined conveyor system.
TD75 type can work in temperature from +40℃ to -10℃, the conveying material temperature is below 50℃ . You can adopt corresponding measures at special occasions, such as explosion-proof, waterproof, anticorrosion and heat resistance.
The available conveying material density is under 2.5 t/m3.
According to the belt width this series is divided into: 500, 650, 800, 1000, 1200, 1400 mm, six kinds of sizes.
●Allow maximum capacity of the conveyor
|
Type of the load idler |
Speed of the belt |
Belt width B（mm） |
|||||
|
500 |
650 |
800 |
1000 |
1200 |
1400 |
||
|
Capacity of the conveyor Q（t/h） |
|||||||
|
Troughing idler |
0.8 |
78 |
131 |
— |
— |
— |
— |
|
1.0 |
97 |
164 |
278 |
435 |
655 |
891 |
|
|
1.25 |
122 |
206 |
348 |
544 |
819 |
1115 |
|
|
1.6 |
156 |
264 |
445 |
696 |
1048 |
1427 |
|
|
2.0 |
191 |
323 |
546 |
853 |
1284 |
1748 |
|
|
2.5 |
232 |
391 |
661 |
1033 |
1556 |
2118 |
|
|
3.15 |
— |
— |
824 |
1233 |
1858 |
2528 |
|
|
4.0 |
— |
— |
— |
— |
2202 |
2996 |
|
|
Flat idler |
0.8 |
41 |
67 |
118 |
— |
— |
— |
|
1.0 |
52 |
88 |
1417 |
230 |
345 |
469 |
|
|
1.25 |
66 |
110 |
184 |
288 |
432 |
588 |
|
|
1.6 |
84 |
142 |
236 |
368 |
553 |
753 |
|
|
2.0 |
103 |
174 |
286 |
451 |
677 |
922 |
|
|
2.5 |
125 |
211 |
350 |
546 |
821 |
1117 |
|
Notice: the capacity in the table is calculated when the material density γ is 1. T/m³ , conveyor angle between 0 ° and 7 °, material dynamic accumulation angle is 30 °.
Category
Online consultation
Previous
None
Related Products
-
MS serial general en masse conveyor -
Special high-temperature en masse conveyor for waste heat boilerThe special high-temperature en masse conveyor for waste heat boiler is specific to the waste heat boiler of metallurgy, building materials, chemical industry, etc. it is our own research and development of conveyor.Special high-temperature en masse conveyor for waste heat boiler0.00The special high-temperature en masse conveyor for waste heat boiler is specific to the waste heat boiler of metallurgy, building materials, chemical industry, etc. it is our own research and development of conveyor. -
SMS serial en masse conveyor for bulk grainSMS serial horizontal en masse conveyor for bulk grain is eight size, the maximum width is up to 1000mm; the maximum capacity is 1250t/h；the maximum conveying distance is 100m; the speed of chain scraper is up to 1.1m/s；The conveyor can be arranged to feed or discharge at one or more openings.SMS serial en masse conveyor for bulk grain0.00SMS serial horizontal en masse conveyor for bulk grain is eight size, the maximum width is up to 1000mm; the maximum capacity is 1250t/h；the maximum conveying distance is 100m; the speed of chain scraper is up to 1.1m/s；The conveyor can be arranged to feed or discharge at one or more openings. -
MSR type high temperature material en masse conveyorMSR series thermal material conveyor is dedicated horizontal en masse conveyor specially designed for conveying high temperature materials. It stands in the international level, adopt hot strong steel to make main components and water cooling system, it can convey materials temperature up to 650℃,the droop head or limit weight tension tail will be adopt to compensate the thermal elongation of scraper chain. It can be widely used to convey sulfur slag, lead and zinc dust, soot, copper smelting smoke and other high temperature and high mill cut materials in metallurgy, building materials and chemical industries. it have 8 machine sizes, the machine width is up to 800mm; the maximum capacity is up to 60 m³/h; the maximum conveying distance is 80 meters; the maximum inclination angle is up to 10°. It can feed and discharge at more points. The main technical parameters are shown in the table below.MSR type high temperature material en masse conveyor0.00MSR series thermal material conveyor is dedicated horizontal en masse conveyor specially designed for conveying high temperature materials. It stands in the international level, adopt hot strong steel to make main components and water cooling system, it can convey materials temperature up to 650℃,the droop head or limit weight tension tail will be adopt to compensate the thermal elongation of scraper chain. It can be widely used to convey sulfur slag, lead and zinc dust, soot, copper smelting smoke and other high temperature and high mill cut materials in metallurgy, building materials and chemical industries. it have 8 machine sizes, the machine width is up to 800mm; the maximum capacity is up to 60 m³/h; the maximum conveying distance is 80 meters; the maximum inclination angle is up to 10°. It can feed and discharge at more points. The main technical parameters are shown in the table below. -
TD type belt bucket elevatorTD series bucket elevator have four kind of buckets , Q type (light bucket), H type (arc bottom bucket), Zd type (middle deep bucket) and Sd type (deep bucket) and so on, they are suitable for conveying various materials, you can choose suitable hopper according to material features.TD type belt bucket elevator0.00TD series bucket elevator have four kind of buckets , Q type (light bucket), H type (arc bottom bucket), Zd type (middle deep bucket) and Sd type (deep bucket) and so on, they are suitable for conveying various materials, you can choose suitable hopper according to material features. -
GTZD type belt bucket elevatorGTZD series silo special bucket elevator has nine sizes, the belt width is up to 1200 mm; the maximum capacity is up to 800 t/h; The max elevating height is up to 65 m; the speed can be up to 3.94 m/s; the series bucket elevators have a expansion section and adjusting section, adopt floating connection between drive arrangement and the mainframe, have superiority in solving tail synchronous tension and preventing belt running deviation. The safety device generally have bake stop device, speed sensors, choke detector, protective device against side running of belt.. Its main technical parameters are shown in the table.GTZD type belt bucket elevator0.00GTZD series silo special bucket elevator has nine sizes, the belt width is up to 1200 mm; the maximum capacity is up to 800 t/h; The max elevating height is up to 65 m; the speed can be up to 3.94 m/s; the series bucket elevators have a expansion section and adjusting section, adopt floating connection between drive arrangement and the mainframe, have superiority in solving tail synchronous tension and preventing belt running deviation. The safety device generally have bake stop device, speed sensors, choke detector, protective device against side running of belt.. Its main technical parameters are shown in the table. -
Wire rope core belt bucket elevatorThe traction component of TDG hoist adopts high-strength steel wire rope core rubber belt, which overcomes the dynamic load generated by the chain and drive, is lighter than the chain, works more smoothly, and can achieve higher productivity at a faster speed. Under the same production conditions , The tape should have high working speed and light weight, which can reduce the line load of the material and the line load of the traction member, thereby reducing the size and weight of the whole machine. At the same time, because the tape has good elasticity and flexibility, it has a damping effect when the hopper is loaded. Due to the use of high-strength steel wire rope core tape, the lifting height and conveying of the hoist can be greatly improved, so the product has a good development prospect.Wire rope core belt bucket elevator0.00The traction component of TDG hoist adopts high-strength steel wire rope core rubber belt, which overcomes the dynamic load generated by the chain and drive, is lighter than the chain, works more smoothly, and can achieve higher productivity at a faster speed. Under the same production conditions , The tape should have high working speed and light weight, which can reduce the line load of the material and the line load of the traction member, thereby reducing the size and weight of the whole machine. At the same time, because the tape has good elasticity and flexibility, it has a damping effect when the hopper is loaded. Due to the use of high-strength steel wire rope core tape, the lifting height and conveying of the hoist can be greatly improved, so the product has a good development prospect. -
Heavy-Duty Flake FeederThe phosphorus plate feeder drives the chain to run by driving, and drags the chain plate to make continuous linear motion to complete the purpose of conveying materials. Phosphorus plate feeders are widely used in mining, metallurgy, building materials and coal industries. This machine is mainly used under the silo and hopper with a certain silo pressure to transport all kinds of large bulk density materials evenly and continuously in a short distance to the secondary crushing, screening and transportation equipment, especially it is more suitable for use below the primary crushing. It is not only suitable for handling coarse-grained materials, but also for fine-grained materials. It can complete heavy work in harsh environments, and has great adaptability to changes in particle size and composition of materials, temperature, viscosity, frost, rain and snow or frozen materials. The feeding amount is even and accurate, but reliable. The machine can be installed horizontally or obliquely. The maximum inclination angle for upward transportation is 23º. It is widely used in non-ferrous, mining, cement, fertilizer, chemical, metallurgy, papermaking and other industries in the process of mining, light transportation, batching, etc. Evenly distribute bulk materials with a capacity of not more than 1.2t/m3, a block weight of more than 140kg, and a temperature of not higher than 350 degrees Celsius.Heavy-Duty Flake Feeder0.00The phosphorus plate feeder drives the chain to run by driving, and drags the chain plate to make continuous linear motion to complete the purpose of conveying materials. Phosphorus plate feeders are widely used in mining, metallurgy, building materials and coal industries. This machine is mainly used under the silo and hopper with a certain silo pressure to transport all kinds of large bulk density materials evenly and continuously in a short distance to the secondary crushing, screening and transportation equipment, especially it is more suitable for use below the primary crushing. It is not only suitable for handling coarse-grained materials, but also for fine-grained materials. It can complete heavy work in harsh environments, and has great adaptability to changes in particle size and composition of materials, temperature, viscosity, frost, rain and snow or frozen materials. The feeding amount is even and accurate, but reliable. The machine can be installed horizontally or obliquely. The maximum inclination angle for upward transportation is 23º. It is widely used in non-ferrous, mining, cement, fertilizer, chemical, metallurgy, papermaking and other industries in the process of mining, light transportation, batching, etc. Evenly distribute bulk materials with a capacity of not more than 1.2t/m3, a block weight of more than 140kg, and a temperature of not higher than 350 degrees Celsius. -
Medium Flake FeederThe phosphorus plate feeder drives the chain to run by driving, and drags the chain plate to make continuous linear motion to complete the purpose of conveying materials. Phosphorus plate feeders are widely used in mining, metallurgy, building materials and coal industries. This machine is mainly used under the silo and hopper with a certain silo pressure to transport all kinds of large bulk density materials evenly and continuously in a short distance to the secondary crushing, screening and transportation equipment, especially it is more suitable for use below the primary crushing. It is not only suitable for handling coarse-grained materials, but also for fine-grained materials. It can complete heavy work in harsh environments, and has great adaptability to changes in particle size and composition of materials, temperature, viscosity, frost, rain and snow or frozen materials. The feeding amount is even and accurate, but reliable. The machine can be installed horizontally or obliquely. The maximum inclination angle for upward transportation is 23º. It is widely used in non-ferrous, mining, cement, fertilizer, chemical, metallurgy, papermaking and other industries in the process of mining, light transportation, batching, etc. Evenly distribute bulk materials with a capacity of not more than 1.2t/m3, a block weight of more than 140kg, and a temperature of not higher than 350 degrees Celsius.Medium Flake Feeder0.00The phosphorus plate feeder drives the chain to run by driving, and drags the chain plate to make continuous linear motion to complete the purpose of conveying materials. Phosphorus plate feeders are widely used in mining, metallurgy, building materials and coal industries. This machine is mainly used under the silo and hopper with a certain silo pressure to transport all kinds of large bulk density materials evenly and continuously in a short distance to the secondary crushing, screening and transportation equipment, especially it is more suitable for use below the primary crushing. It is not only suitable for handling coarse-grained materials, but also for fine-grained materials. It can complete heavy work in harsh environments, and has great adaptability to changes in particle size and composition of materials, temperature, viscosity, frost, rain and snow or frozen materials. The feeding amount is even and accurate, but reliable. The machine can be installed horizontally or obliquely. The maximum inclination angle for upward transportation is 23º. It is widely used in non-ferrous, mining, cement, fertilizer, chemical, metallurgy, papermaking and other industries in the process of mining, light transportation, batching, etc. Evenly distribute bulk materials with a capacity of not more than 1.2t/m3, a block weight of more than 140kg, and a temperature of not higher than 350 degrees Celsius. -
LS serial screw conveyorLS type screw conveyor adopt ISO01050 standard to design and manufacture, and accord with professional standard ZBJ81005.1¡288. The conveyor structure is very innovative, the head and tail bearing install outside the casing; the middle hanger bearing have two interchangeable structure, rolling and sliding with dust-proof sealing arrangement; the discharge end is equipped with cleaning device; the inlet and outlet can be arranged flexibly; low noise, strong adaptability, convenient operation and maintenance. The conveyors adopt nylon and polyflon as sealing arrangement with small resistance and seal wear-resisting. The materials of sliding bearings have casting copper, alloy wear resistant cast iron, canister cornerstone ink less oil lubrication.LS serial screw conveyor0.00LS type screw conveyor adopt ISO01050 standard to design and manufacture, and accord with professional standard ZBJ81005.1¡288. The conveyor structure is very innovative, the head and tail bearing install outside the casing; the middle hanger bearing have two interchangeable structure, rolling and sliding with dust-proof sealing arrangement; the discharge end is equipped with cleaning device; the inlet and outlet can be arranged flexibly; low noise, strong adaptability, convenient operation and maintenance. The conveyors adopt nylon and polyflon as sealing arrangement with small resistance and seal wear-resisting. The materials of sliding bearings have casting copper, alloy wear resistant cast iron, canister cornerstone ink less oil lubrication. -
WLS shaftless screw conveyorThe WLS shaftless screw conveyor is our company to develop new products, it concisits of by the drive device, shaftless spiral blade, u-shaped casing, wearing plate, over etc. Is mainly used in chemical, food, medicine, paper industry, such as beverage, environmental protection industry strong adhesive material, paste, viscous material (such as chemical raw materials, waste paper pulp, malt, sludge, etc.) and easy winding material (household waste), has a unique advantage. Shaftless screw conveyor is compared with the general screw conveyor, with no central axis design, using the overall steel spiral push with a flexible material, thus has the following advantages:WLS shaftless screw conveyor0.00The WLS shaftless screw conveyor is our company to develop new products, it concisits of by the drive device, shaftless spiral blade, u-shaped casing, wearing plate, over etc. Is mainly used in chemical, food, medicine, paper industry, such as beverage, environmental protection industry strong adhesive material, paste, viscous material (such as chemical raw materials, waste paper pulp, malt, sludge, etc.) and easy winding material (household waste), has a unique advantage. Shaftless screw conveyor is compared with the general screw conveyor, with no central axis design, using the overall steel spiral push with a flexible material, thus has the following advantages: -
LLS double shaft screw conveyorThe biaxial screw conveyor complete delivery material by two symmetrical shaped screw axis synchronous views, consists of casing, the spin screw axis, drive device, gear, bearing, bearing part, chain cover and so on. it has novel structure, long work life.LLS double shaft screw conveyor0.00The biaxial screw conveyor complete delivery material by two symmetrical shaped screw axis synchronous views, consists of casing, the spin screw axis, drive device, gear, bearing, bearing part, chain cover and so on. it has novel structure, long work life. -
TD75 type fixed belt conveyorTD75 type general fixed belt conveyor (hereinafter referred as TD75) is widely used for conveying bulk materials or items in metallurgy, coal, transportation, textile, hydropower and other departments for its large capacity, simple structure, convenient maintenance, low cost, strong commonality .According to the requirement of the conveying process, it can be simple conveying, can also combine with other conveyor to form horizontal or inclined conveyor system.TD75 type fixed belt conveyor0.00TD75 type general fixed belt conveyor (hereinafter referred as TD75) is widely used for conveying bulk materials or items in metallurgy, coal, transportation, textile, hydropower and other departments for its large capacity, simple structure, convenient maintenance, low cost, strong commonality .According to the requirement of the conveying process, it can be simple conveying, can also combine with other conveyor to form horizontal or inclined conveyor system. -
DTII type fixed belt conveyorDTII type fixed belt conveyor is general type series products, which can be widely used in metallurgy, mining, coal, and port, power station, building materials, chemical industry, light industry, petroleum and other industries. According to the requirement of the conveying process, can be single delivery, can also be more than one or with other conveyors to form horizontal or inclined conveyor system. The available transport bulk materials and items bulk density is 0.5 ~ 2.5 t/m3.DTII type fixed belt conveyor0.00DTII type fixed belt conveyor is general type series products, which can be widely used in metallurgy, mining, coal, and port, power station, building materials, chemical industry, light industry, petroleum and other industries. According to the requirement of the conveying process, can be single delivery, can also be more than one or with other conveyors to form horizontal or inclined conveyor system. The available transport bulk materials and items bulk density is 0.5 ~ 2.5 t/m3. -
DJ type corrugated and sidewall belt conveyorDJ series corrugated sidewall belt conveyor adopt conveyor belt with corrugated and sidewall, the sidewall, diaphragm plate and basebelt form the “box” form container, suitable for large angle coveying (the angle up to 90¡). It can be used to convey bulk material in power stations, chemical industry, metallurgy, mining, coal, ports, building materials and light industry. It can be single coveying, be more than one, or combined with other conveying machine to form horizontal or inclined conveying system. DJ series corrugated sidewall belt conveyor can run in temperature from +40℃ to -10℃ £the available temperature of material must below 50¡£loose density between 0.5 to 2.5t/m3. The main technical parameters are shown in the table.DJ type corrugated and sidewall belt conveyor0.00DJ series corrugated sidewall belt conveyor adopt conveyor belt with corrugated and sidewall, the sidewall, diaphragm plate and basebelt form the “box” form container, suitable for large angle coveying (the angle up to 90¡). It can be used to convey bulk material in power stations, chemical industry, metallurgy, mining, coal, ports, building materials and light industry. It can be single coveying, be more than one, or combined with other conveying machine to form horizontal or inclined conveying system. DJ series corrugated sidewall belt conveyor can run in temperature from +40℃ to -10℃ £the available temperature of material must below 50¡£loose density between 0.5 to 2.5t/m3. The main technical parameters are shown in the table. -
GY typerotary feeder(also called star feeder or electric lock)GY type rotary feeder is used to dry powder or small particles in the upper bin feed the material continuously and evenly to the next equipment. This machine is suitable for thermal power plant dust collector, air preheater and economizer equipment discharging mouth or dry ash conveying pipe, air lock and uniform feeding. Can also be used for chemical plants, cement plants, food and other departments of the pneumatic conveying system.GY typerotary feeder(also called star feeder or electric lock)0.00GY type rotary feeder is used to dry powder or small particles in the upper bin feed the material continuously and evenly to the next equipment. This machine is suitable for thermal power plant dust collector, air preheater and economizer equipment discharging mouth or dry ash conveying pipe, air lock and uniform feeding. Can also be used for chemical plants, cement plants, food and other departments of the pneumatic conveying system. -
Chain bucket conveyorSDBF series chain bucket conveyor is an independent design for continuous conveying upon absorbing forging advanced technology, suitable for conveying power and block bulk material on horizontal or inclined( angle less than 60°)， such as cement, power plant ash, metallurgical raw materials and ash, sand, limestone, coke, etc.. The heat resistance and reliability are better than apron conveyor, belt conveyor, and vibrating conveyor, etc, the conveying length is up to about 150m and save electrcity is above 50% than conveyor. The conveyor has excellent environmental performance as full sealed structure. It cab be widely used in building industry, coal industry, chemical industry, electric power, etc.Chain bucket conveyor0.00SDBF series chain bucket conveyor is an independent design for continuous conveying upon absorbing forging advanced technology, suitable for conveying power and block bulk material on horizontal or inclined( angle less than 60°)， such as cement, power plant ash, metallurgical raw materials and ash, sand, limestone, coke, etc.. The heat resistance and reliability are better than apron conveyor, belt conveyor, and vibrating conveyor, etc, the conveying length is up to about 150m and save electrcity is above 50% than conveyor. The conveyor has excellent environmental performance as full sealed structure. It cab be widely used in building industry, coal industry, chemical industry, electric power, etc. -
Tooth chip crusherThe tooth chip crusher is suitable to crush the materials, such as easy to agglomerate after moisture absorption, harden,and small block material required to control the material particle size, especially a kind of alkali recovery system suitable for light alkali papermaking industry boiler alkaline ash broken and charging system of glauber's salt glauber's salt storehousebroken.Tooth chip crusher0.00The tooth chip crusher is suitable to crush the materials, such as easy to agglomerate after moisture absorption, harden,and small block material required to control the material particle size, especially a kind of alkali recovery system suitable for light alkali papermaking industry boiler alkaline ash broken and charging system of glauber's salt glauber's salt storehousebroken. -
Double-layer pneumatic (electric) flap valveThe valve, gate structure is compact, flexible working, use and reliable, easy to operate, used in the opening and closing and the reversing in the process of conveying.Double-layer pneumatic (electric) flap valve0.00The valve, gate structure is compact, flexible working, use and reliable, easy to operate, used in the opening and closing and the reversing in the process of conveying. -
Electric (manual) flat gateThe valve, gate structure is compact, flexible working, use and reliable, easy to operate, used in the opening and closing and the reversing in the process of conveying.Electric (manual) flat gate0.00The valve, gate structure is compact, flexible working, use and reliable, easy to operate, used in the opening and closing and the reversing in the process of conveying.
Online message
客户留言
Description:
+86-717-4904858
Online message 
Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd
Add：Yidu City,Hubei Province,Lucheng Street Changjiang Road East No.8
Tel：+86-717-4904858 / 4820569
Mr. Zhou：+86-15871569828
Mr. Gong：+86-13508601368
Ms. Zou：+86-13872614986
©2021 Hubei Yidu Yiyun Mec.&Elec. Engineering Co.,Ltd SEO tags Power by 300.cn
